Product care

In Jadberg, we try to keep our products long and good. Therefore, it is necessary to follow the care instructions on the labels and follow the following recommendations for maintenance:

- When washing, use a washing bath with a maximum temperature of 40 degrees. C and a friendly wash mode. ATTENTION at higher temperatures may cause permanent damage to the jersey or print.
- It is recommended to wash the prints with the back side.
- Wash the dirty jerseys as soon as possible.
- Use only gentle detergents to keep the colors bright and shiny for a long time.
- Jadberg jerseys and shorts are separate from other types of jerseys or other clothing.
- Do not leave jerseys in the washing bath for a long time, as the longer the effect of aggressive detergents may cause permanent damage to the jersey or print.

- Drapery hangers suspended freely in the vertical position. This extends their service life and durability.
- In any case, do not wear jerseys on the heaters.
- Do not use a tumble dryer.

- Ironing is not necessary, the material does not bend.
- Do not iron the prints in any way.

- Under Jadberg jerseys and shorts, use light functional, cotton clothing.

In Jadberg, we try to keep our products long and good. Therefore, it is necessary to follow the care instructions on the labels and follow the following recommendations for maintenance:

- When washing, use a washbasin with a maximum temperature of 30 ° C. C. ATTENTION at higher temperatures may cause permanent damage to the jersey or print.
- It is recommended to wash the prints with the back side.
- Wash the dirty jerseys as soon as possible.
- Use only gentle detergents to keep the colors bright and shiny for a long time.
- Jadberg jerseys and shorts are separate from other types of jerseys or other clothing.
- Do not leave jerseys in the washing bath for a long time, as the longer the effect of aggressive detergents may cause permanent damage to the jersey or print.

- Drapery hangers suspended freely in the vertical position. This extends their service life and durability.
- In any case, do not wear jerseys on the heaters.
- Do not use a tumble dryer.

- Ironing is not necessary, the material does not bend.
- Do not iron the prints in any way.

- Under Jadberg jerseys and shorts, use light functional, cotton clothing.

In Jadberg, we try to keep our products long and good. Therefore, it is necessary to follow the care instructions on the labels and follow the following recommendations for maintenance:

- Jadberg balls must always be pushed by a needle only, never by overpressure, as the valve will break.
- The new balls do not have the ideal shape or size right after inflating. Therefore, it is necessary to inflate the balls before the first use to a pressure of about 0.8 Bar and leave for several hours at rest. The ball in between gets the right shape and size.
- Never add new, unused balls to more than the recommended 0.8 Bar, with the exception of 1.0 Bar. If you roll over the new ball in an effort to get the ideal shape and size right away, it is almost certain that the over-inflated ball will allow and increase its volume undesirably during use. This phenomenon is usually accompanied by the stretching of the material and subsequent cracking of the facing layer, while cutting the seams into individual parts. The warranty is not covered by the balls thus destroyed.
- Before the first tapping, it is recommended to plug a drop of oil into the valve. This improves the valve's parameters, prevents over-triggering of the ball and facilitates penetration of the needle to protect the valve from tearing.
- Before each needle, moisten the needle.
- Bring the balls to the recommended pressure, never overfill them - there may be irreparable damage not covered by the warranty.
- If the balls are dirty after use, use lukewarm water only. Never use organic solvents, detergents,
- If the balls are wet, do not cover them with direct heat sources, but at room temperature.
- Do not store wet or damp balls in any way.

In Jadberg, we try to keep our products long and good. Therefore, it is necessary to follow the care instructions on the labels and follow the following recommendations for use and maintenance:

- The bags do not wash in the washing machine.
- Wash the bags with a soap soaked in soapy water at a maximum temperature of 30th. C.
- Then rinse with clean water.
- Never use organic solvents or other chemicals for cleaning.
- Do not overload the backpacks and bags, the weight of the contents must match the carrying capacity of the bag. Overloading and moving sharp-edged items can cause irreversible damage.